5.8G 5W FPV VTX 96CH Support IRC Tramp 5.8Ghz Long Range Image Transmission AV Sender
I.Features
- Breakthrough wideband system utilizing custom PLL chips and wideband amplifiers, with an operational band-width encompassing the entire 5.8GHz and 4.9GHz extended channels.
- up to 5W transmitting power, and provide multi-level adjustment.
- All channels deliver power at nominal levels with exceptional consistency.
- Rigorous quality control ensures all products undergo power calibration and thermal aging testing.
- 96 channels supports band switching within the 4875-6060MHz range.
- Rugged aluminum alloy housing with integrated turbine fan for active cooling
II.General Characteristics
Frequency band: 4875-6060MHz
Frequency precision:±200KHz (Typ.)
Channel:96 CH
Output power:PIT/25mW/200mW/1W/5W
Modulation type: FM
Power Supply:DC 7-30V (2-8S)
Frequency control : PLL
Video input level:1V±0.2Vp-p (typ.)
Control Protocol: IRC Tramp
S/N(For ±3MHz):>55dBc
Antenna:SMA 50 Ohms
Operating Temperature: -10℃~+70℃
Dimension:44*28.6*14.7mm
Weight:25.3g
III.Frequency Table:
IV.Settings
Controlled using a single button, the button integrates RGB lighting, blue for band, red for channel, and green for power level.
When there is no operation, the RGB LED blinks cyclically, the number of times the RGB blinks represents the current VTX status (when the green LED is always on, the VTX enters PITMODE).
Long press the button to enter VTX setting, at this time the RGB lights are lit alternately, release the button under the corresponding color light to enter the corresponding function setting. At this time, short press the button to adjust the value.
For setup via the flight controller, connect the DATA pin and use the IRC Trump protocol
Votre message doit contenir entre 20 et 3 000 caractères!